 | New |
 | Changed |
 | Removed |
 | Fixed |
 | Backwards compatibility |
2025.3
Backwards compatibility
| ASAM: XIL: The test bench configuration option Adapt matrix layout is now automatically considered in the trace analysis for the recording format MDF4. (TTS-53317) | |
| ControlDesk: The default platform name is no longer ds1006. For ds1006 test benches, it is necessary to refresh the test bench configuration once and set the platform name to ds1006. (TTS-51894) | |
| Due to the adjustment of the canvas layout from a fixed number of columns to a fixed column width, displacements may occur in an existing layouts. (TTS-52638) | |
| Ethernet: From now on network interface cards are identified by their name without MAC address and are specified that way inside the TBC. An automatic migration is not possible. Therefore all Ethernet TBCs have to be refreshed and the correct network interface card has to be selected manually. (TTS-48378) | |
| Exporting a project as a playbook (to test.guide) is deprecated and will be removed in version 2026.1. (TTS-54559) | |
| For ecu.test calibration the XCP transport layer must be selected at the ECU access in the test configuration. (TTS-46168) | |
| GenICam: Cameras are identified by their unique serial number instead of their own name. It may therefore be necessary to update the camera list and reselect the camera. (TTS-51921) | |
| GenICam: The tool is available again. The vendor has fixed the temporary incompatibility. (TTS-53877) | |
| Linux: Ubuntu version 20.04 and 22.04 will no longer be supported as of ecu.test version 2026.1. (TTS-54559) | |
| MDF4: Due to changes of the format details, newly created packages and projects are not compatible with older ecu.test versions, if format details are used and set. This affects, e.g., manually defined recordings in the signal recording, parameter sets, AddTrace, etc. (TTS-50585) | |
| ODX: DID and RoutineControl specific test steps have been removed after being deprecated. (TTS-50993) | |
| Several included programs, such as Signal Editor, Signal Viewer and Diff Viewer, have new names. The TRF-Viewer has been renamed Report Viewer, which also affects its executable file: TRF-Viewer.exe is now report_viewer.exe. The executable file for the License Manager has been changed from LicenseManager.exe to license_manager.exe. (TTS-52557 TTS-52562 TTS-54539) | |
| The ICMP-RAW port for the tools tracetronic: Ethernet, Vector: XL-API, and Vector: SIL Kit is deprecated and will be removed in version 2026.1. (TTS-50583) | |
| The Python library NumPy delivered with ecu.test has been updated from version 1 to version 2. When using NumPy in your own code or Python libraries that depend on NumPy, compatibility should be taken into account. See also the migration guide on the NumPy website. (TTS-51901) | |
| Tool FEP is deprecated and is scheduled to be removed in version 2026.1. (TTS-53770) | |
| Tool Server: The executable files have been renamed. On Windows from Tool-Server.exe to tool_server.exe, on Linux from tool-server_runner to tool_server_runner. (TTS-52561 TTS-54539) | |
| Using a custom report directory for subprojects is deprecated. This feature will be removed in version 2026.1. (TTS-52654) |
User interface and editors
| ATX generator settings: The description of the settings is now correctly displayed in English when the GUI is in English. (TTS-53072) | |
| Added support for high-resolution displays such as 4K displays or projectors. Text and UI elements remain sharp and easy to read when display scaling (125% or higher) is enabled. (TTS-53264) | |
| Attributes panel: The OK/Cancel buttons of the dialog Edit project attributes work as expected. (TTS-52329) | |
| Bus Message Monitoring: Expected values for communication timing monitoring can be deleted via the context menu again. (TTS-53080) | |
| Diff: Fixed display error where a misleading placeholder text was falsely displayed when comparing removed or added elements. (TTS-52408) | |
| Fixed issues in the dialog for parameterized execution of a package. (TTS-52530) | |
| If a package that records test case variables is executed as a stimulation package, a false error message about invalid mappings is no longer displayed. (TTS-54454) | |
| MDF4: In the format details, the name used as alias in the test configuration, which refers to a recording device of the recording, must be unique. (TTS-53572) | |
| Mapping editor: ecu.test no longer freezes when renaming a mapping item, confirming the change with a click outside the application window and closing the appearing dialog afterwards. (TTS-53757) | |
| Mask editor: fast-forwarding and rewinding videos no longer causes an error. (TTS-52806) | |
| Package parameterization: The adoption of the selected variable suggestion under Windows works again. (TTS-52781) | |
| Parameterized package execution: Parameters from the previous execution are cached. (TTS-51343) | |
| Recording step of the trace analysis: The dialog Edit signal recording correctly displays the settings for MDF4 after reopening. (TTS-52910) | |
| Signal recordings in parameter sets can now be cut or deleted again. (TTS-54828) | |
| TBC editor: Fixed various issues and usability problems in the TBC Editor. (TTS-52957) | |
| Test case editor: If a mapping is assigned to a test step for which the test step is not valid, the test step is again marked with a red cross and a corresponding error message is displayed. (TTS-52185) | |
| The ecu.test vault resolves relative file paths when opening. (TTS-51693) | |
| The input dialog of the ecu.test vault closes after 5 minutes if no password has been entered. (TTS-53257) | |
| Workspace Explorer: Hidden folders or files with a preceding "." can now be shown or hidden using the corresponding button. (TTS-44319) |
Test language
| In EES test steps, ecu.test accepts potetials with a backslash, too. (TTS-52823) | |
| Package mapping: Generic package references are now also listed in the parameterized mapping of the package reference test step. (TTS-51676) | |
| The specification of an alternative report directory in the TCF is also properly supported by drive. (TTS-52740) | |
| The status of ecu.test with regard to active tasks is displayed correctly when a project is executed and the report is subsequently uploaded to the test.guide default server. (TTS-52946) |
Tool and test-device connectors
| ADB: A new selection option <auto> of the TBC property Device allows the automatic use of a device if only one is available. (TTS-52262) | |
| ADB: Screen recording is now supported for devices from Android version 11 (API level 30). (TTS-48757) | |
| ADB: The port jobs PullFile and PushFile now work when multiple Android devices are available. (TTS-53587) | |
| ARXML: ECU-COMM-PORT-INSTANCES is now treated as an optional element. (TTS-53497) | |
| ASAM ACI: The WatchDog also sends responses in the background while a long-blocking method is running. (TTS-53988) | |
| ASAM CMP: Standard CAN IDs are interpreted according to final specification. (TTS-54261) | |
| ASAM XIL: Improved error message when querying available variables from the model port. (TTS-53577) | |
| ASAP STEP: Added new jobs to activate and deactivate variants. (TTS-52754) | |
| AURELION: If the connection is lost, a new connection is attempted for up to 10 seconds before an error is thrown. (TTS-54433) | |
| Bus HW: Automatic calculation of E2E signals now also works if they are not located at the positions inside the PDU which are defined in the standard. (TTS-52566) | |
| Bus-HW: Add new job GetLastReceptionTimestamp for CAN. (TTS-48801) | |
| CAN, J1939: Using InitFrame on a CAN port that shares the controller with a J1939 port, does no longer cause false errors about incorrect parameters. (TTS-31810) | |
| CANape: ecu.test uses the new method Asap3GetEcuTasks3 as a default. If the method is not available, Asap3GetEcuTasks is utilized as fallback. (TTS-51220) | |
| CANape: Bus access for Socket-Adaptor is now possible via ethernet. (TTS-52599) | |
| CANape: Removed connection test that could lead to loss of tool connection. (TTS-52702) | |
| CANape: The job GetCANapeLog now also works for CNCC projects with the keyword PROJECT_ROOT. It is expected that the log file is saved next to the CNCC project file. (TTS-49888) | |
| CANape: Writing of curve/map calibration values works when there is another tool active that uses A2L online query. (TTS-53041) | |
| CANoe CANalyzer: The behavior after stopping a measurement can now be configured more precisely. The tool can be closed, it can remain open and the previously loaded configuration can also be reloaded. (TTS-49242) | |
| CARLA: The CARLA tool connection has been completely removed. Regression tests can not be executed anymore. (TTS-49255) | |
| CarMaker: Stimulate test step uses real-time expressions (real-time capable). Ramp segments now correctly begin at the configured start value. (TTS-54119) | |
| ControlDesk ServiceManager port: It is now possible to read and write variables with utf-8 and utf-16 string data types in their text representation. (TTS-52612) | |
| ControlDesk ServiceManager port: Recording is now supported for scalar values. (TTS-51872) | |
| ControlDesk: For the job ImportDCMFile, it is now possible to control if an existing file should be overwritten using the parameter BehaviorIfFileExists. (TTS-53856) | |
| ControlDesk: Support for dSPACE Release 2025-A with ControlDesk 25.1 (TTS-54100) | |
| ControlDesk: The default model port has the new property Model reset behavior. If set, a model reload will be triggered at each test start. (TTS-53035) | |
| ControlDesk: The default platform name for the model port is SCALEXIO from now on. (TTS-51894) | |
| DTS: Default values for parameters are offered in the symbolic test steps. (TTS-51948) | |
| DiagRA: The new tool job SaveCurrentPage is available. (TTS-53564) | |
| E-Sys: Support of the new version of E-Sys 25.04.01. (TTS-50965) | |
| EDIABAS: All dynamic parameters are available in the test steps. (TTS-54464) | |
| EDIABAS: New TCF option EDIABAS Configuration to transfer any EDIABAS configuration settings. (TTS-53152) | |
| EDIABAS: Selection lists for dynamic parameters are always available in the test steps. (TTS-53002) | |
| EDIABAS: Special characters in test step parameters are transferred correctly. (TTS-53054) | |
| EDIABAS: Test step parameters of type binary are transferred including leading zeros. (TTS-53176 TTS-53177) | |
| ETAS BOA: Support for CAN-FD (TTS-53513) | |
| Ethernet: A Socket Adaptor PDU will now also be received if it can be sent by different ECUs, provided that the correct PDU from the Bus access tab is used. (TTS-53772) | |
| Ethernet: Fixed a bug that caused an incorrect prefix length to be configured for the IP address on SERVICE ports. (TTS-53188) | |
| Ethernet: MACsec: A negotiaged Security Association affects all TCP/IP stack on the same device with the same MAC address. The packet number counter is shared. (TTS-51314) | |
| Ethernet: New test step provide method (TTS-37413) | |
| Ethernet: Robustness of SOME/IP reception has been improved by having the SERVICE port ignore Socket Adaptor messages which arrive at the same UDP or TCP port. (TTS-53476) | |
| Ethernet: Service Discovery: As a reaction to an OFFER, only the matchung SUBSCRIBEs are sent. (TTS-52608) | |
| Ethernet: Socket-Adaptor messages are filtered correctly. (TTS-53562) | |
| Ethernet: TBC setting Leave simulated services active no longer leads to problems with consumer test steps in later package executions. (TTS-53501) | |
| Ethernet: The job CloseConnection also stops all cyclic messages. (TTS-53150) | |
| Ethernet: The test step Stop Service Discovery does not cause active cyclic instances of Send Event to continuously generate error messages. (TTS-53234) | |
| FMI: Access via application port to measurement and calibration variables within Functional Mock-Up Units (FMUs) is possible if they comply with the FMI Layered Standard for XCP (FMI-LS-XCP). (TTS-48969) | |
| FMI: Fixed an issue where Time and Input Events differing only within floating-point inaccuracies (sub-nanosecond range) triggered unnecessary solver steps in the FMU. This caused, among other things, shifted samples in the recording. (TTS-48700) | |
| FMI: The new BUSACCESS port enables CAN access (TX and RX) to FMU terminals implemented according to the FMI-LS-BUS Standard (Low-Cut). (TTS-52545 TTS-53155 TTS-54396) | |
| For many tools their tool and port jobs are now grouped into subcategories in the action window. (TTS-53059) | |
| GenICam: Each camera now runs in its own process, which improves performance for multi-camera setups. (TTS-52727) | |
| Generic bus port: The port property Invalid RAW to PHYS conversion was renamed to Raw to phys conversion behavior and now also applies to read test steps. This way, raw and text representations can be calculated even if the physical value by the model is out of the physical limits of the bus signal. (TTS-53578) | |
| INCA: ES910: Further improved compatibility. (TTS-52820) | |
| INCA: The initial state of an experiment is restored upon closing. Manual changes to the experiment while ecu.test is accessing it can lead to undefined behavior. (TTS-6637) | |
| ISO-TP: Job RegisterStreamForInbox does not drop any messages that are coincidentally UDS compliant. (TTS-54562) | |
| If errors occur during port job execution, the error message now contains the name of the affected tool. (TTS-52662) | |
| MACsec: Fixed an issue where MACsec key agreement did not apply to future TCP/IP stacks if any were already running if Do not stop MKA option was activated in the TBC. (TTS-53233) | |
| MAGNA: BluePiraT: Tool can be used again, and can be added in the TBC editor. (TTS-54406) | |
| MOTEON: Motor Test Bench: New tool connection based on ASAM: XIL API. (TTS-52182) | |
| ModelDesk: During download and activate tool jobs, the active experiment is only saved if a change to the aforementioned experiment was previously made via ecu.test. (TTS-51955) | |
| ModelDesk: Tooljobs DownloadScenario and DownloadRoad have a new parameter force. If force is True, the corresponding element will always be downloaded again, otherwise only if necessary (e.g. if changes have been made). (TTS-45202) | |
| ModelDesk: When loading scenarios, attributes that are not available are omitted. (TTS-53182) | |
| Multimedia: Deprecation warnings generated by screen_recorder_sdk during screen recording are no longer displayed when using other image sources. (TTS-54505) | |
| Multimedia: RTP streams can now also be used as an audio source via the new Audio port implementation type RTP. (TTS-51266) | |
| RT-LAB: Alias files are now loaded correctly. (TTS-53889) | |
| Read signal group: Fixed a bug that could cause reading signal groups to fail if a port was not stopped. (TTS-50634) | |
| Read test steps: Comments can be added to the evaluation. (TTS-44414) | |
| SAE PassThru: New CAN-FD diagnostics port. (TTS-43099) | |
| Selenium: The new option Additional arguments in the test bench configuration can be used to pass additional command line parameters when starting the WebDriver. (TTS-52834) | |
| Selenium: The new tool job GetWebDriver provides access to the Selenium API for advanced use cases. (TTS-52248) | |
| Synopsys: Silver: ecu.test supports Silver on Linux. (TTS-52255) | |
| Synopsys: Silver: The new option Use SILVER's internal model-time for recordings has been added to the test bench configuration and ensures that recordings now start with the SILVER model time instead of 0. (TTS-52009) | |
| TOSUN: Added support for LIN. (TTS-53526) | |
| TOSUN: Use of more than one CAN channel is possible. (TTS-54132) | |
| The tool job UploadFileOrFolder creates the missing path if the remotepath parameter specifies a path that is not fully present. (TTS-53822) | |
| UserTool: A display name (DisplayName) can now be defined for tool and port properties. (TTS-52516) | |
| UserTool: Job parameters with the data types Literal[int] or Literal[bool] no longer cause an error when saving the test bench configuration. (TTS-52945) | |
| Vector CANoe/CANalyzer: The bus implementation type MODEL BASED is now available. (TTS-53034) | |
| Vector XL API: Fixed a crash upon unexpected reception events with active J1939. (TTS-54863) | |
| Vector XL API: Model time can now be received from any model port configured as time source. It is no longer necessary to use the Vector XL API model port and provide a model time DLL. (TTS-42403) | |
| Vector XL API: new TBC option Preempt send buffer for CAN-FD ports. (TTS-51683) | |
| Vector-HW: For Ethernet access the link state can now be read via the new port job GetLinkState. (TTS-52189) | |
| dSPACE XIL API: Multiple instances of the tool can now be added to a test bench configuration. (TTS-54900) | |
| dSPACE XIL API: The jobs ReadVariable and WriteVariable of the ControlDesk tool adapter are now also available for dSPACE XIL. (TTS-52969) |
Trace analysis
| A performance issue for trace analyses with many referenced trace analyses was fixed. (TTS-54784) | |
| Array-based NumPy trace step templates: With Signal.GetRecordingInfo() you can access information about a signal's recording file. (TTS-51668) | |
| Downstream trace analysis: Compatibility with test.guide version 1.197 or higher established. (TTS-52738) | |
| Plot: Signals from the mapping search dialog are not added to the plot if the dialog is aborted. (TTS-54128) | |
| Project execution: The parallel analysis job execution continues even if not all additional processes could start. (TTS-51008) | |
| Selecting a mapping in a trace step via Browse mapping does not lead to an error. (TTS-54773) | |
| Standard trace step template CheckCRC: When using Autosar E2E profile 1B, the CRC value is extracted correctly from the message. (TTS-54836) | |
| Standard trace step template CheckCRC: When using Autosar E2E profile 4, the CRC value is extracted correctly from the message. (TTS-53009) | |
| Synchronization: Custom synchronization methods can now be implemented as UserPyModule. Required parameters and signals can be defined and conveniently configured within the familiar synchronization settings. A detailed guide is available in the API documentation. (TTS-52975) | |
| Synchronization: The group of test case variables can be synchronized even if the package does not contain a trace analysis. (TTS-52331) | |
| The creation of synchronized MDF files during synchronization is now significantly faster. (TTS-53205) | |
| Trace step templates: With RecordingInfo.GetStartTimeNs() you can access the start time of the recording. (TTS-51668) |
Test report
| Descriptions of mappings for stimulation and analysis packages are shown in the test report. (TTS-50870) | |
| In case of an error, additionally to the error message, the original comment of the test step is displayed in the comment column of the report. (TTS-54214) | |
| In the reporting of the multicheck test step, the previously incorrect indication of attempts and elapsed time is no longer displayed when the test step is aborted. (TTS-53791) | |
| Project: The configuration change test step writes the new status of all tools to the report after it has been executed. (TTS-53239) | |
| REST API: The alternative package execution name packageReportName is written to the ATX report and displayed in the test.guide and TRF report. (TTS-51287) | |
| Report Viewer: Correct reporting of AXS utility test steps returning ERROR as their own verdict. (TTS-52183) | |
| Report Viewer: From the report individually executed analysis jobs correctly resolve the path to their recordings. (TTS-54486) | |
| Report Viewer: In the test steps of a .prf project report a double click on a parallel package shows its content and the corresponding item is selected in the explorer. (TTS-52527) | |
| Report Viewer: The toolbar can be used to switch between the display of absolute timestamps. You can choose between local time, the time of the test host, and UTC time. (TTS-53554) | |
| Report Viewer: There is a context menu entry for subprojects or packages that shows them in the file manager. (TTS-53836) | |
| The origin of the used mapping for stimulation and analysis packages is shown in the test report. (TTS-50871) |
trace.xplorer and trace.xplorer basic
| Fixed a bug that could cause the application to freeze in specific cases when sorting flag list entries by visibility, type, color or length. (TTS-52275) | |
| In the Signals toolbox, entries for data sources and signal groups can be fully expanded and collapsed using their context menu or the new functions in the toolbar. (TTS-51313) | |
| The ASTRACE format supports a new data type for storing links (URL). Such links can be opened by using the context menu entry Open URL in Browser from the table view. This allows you to quickly jump from trace.xplorer to the corresponding test run in test.guide after exporting key indicators into an ASTRACE file. (TTS-46638) | |
| The system menu of the application window provides an additional command to show the window permanently in the foreground. The menu can be accessed by right-clicking on the title bar. (TTS-54047) | |
| The text output formatting for integer signal values can be configured individually for each signal in the Properties toolbox. You can select the number system (binary/decimal/hexadecimal/octal) and other options. This affects the table view, the Measure toolbox and the CSV export. (TTS-51907) | |
| When repairing ASTRACE documents, the original file is replaced and opened if the operation was successful. If requested, a backup copy of the file is created first. (TTS-54603) | |
| trace.xplorer only: The PCAP import filter now also supports importing Socket Adaptor signal data from PCAP files. (TTS-53278) | |
| trace.xplorer only: The capture interfaces for Wireshark can now also be used with a dongle-based license. (TTS-50967) |
Parser and file formats
| ARXML SOCKET-ADAPTOR: Support for version 4.2.2. (TTS-54191) | |
| ARXML Socket-Adaptor: Added support for non-SOME/IP events. (TTS-54024) | |
| ARXML Socket-Adaptor: Improved parsing of sender and receiver addresses. (TTS-54024) | |
| ARXML: The header byte order of Container PDUs is now correctly parsed. (TTS-54189) | |
| ARXML: To resolve data type references the data type mappings of software compontents are taken into account. (TTS-53238) | |
| BLF, GIN: Read all SOME/IP messages if pseudo signal PacketSomeIp is read (not only SOME/IP-SD messages). (TTS-53201) | |
| DiagBrwoser: The deprecated method GetUdsName has been removed. (TTS-51226) | |
| Ethernet: In case of PDU fragmentation for UDP, a warning is shown, that the Socket Adaptor does not support this due to missing guaranteed message order. (TTS-53181) | |
| Ethernet: Meaningful error message for invalid port entry. (TTS-52893) | |
| Ethernet: Timestamp correction for PLP messages with multiple SOME/IP messages no longer leads to duplicate timestamps. (TTS-52835) | |
| MDF4: Chronologically unsorted marker events can now be read in. (TTS-52764) | |
| MDF4: Data list blocks are now read more robustly. (TTS-54380) | |
| MDF4: Fixed an issue where a recording with bus raw data as well as interpreted signals could cause an error when opening the file. (TTS-54465) | |
| MDF4: The parser has been optimized and now reads up to 1.7 times faster. In addition, writing compressed MDF4 files (e.g. via signal recording step in trace analysis) has been accelerated by up to a factor of 3.5. (TTS-53180) | |
| MDF4: The parser now ignores the specification of "device" as a "device from trace" in the AddTrace test step, as this prevented traces with signals without a system identifier from being addressed (e.g. recordings from LABCAR). (TTS-50675) | |
| ROS2: Optimizations for ROS2 parser (TTS-52546) |
Interfaces/ APIs
| ApiClient (.Net): Fixed a problem that caused errors when exiting. Objects are now automatically disposed by the Garbage-Collector if there are no more references to the object. (TTS-45838) | |
| CustomChecks: The feature for applying all unambiguous fixes can be used if callbacks are implemented with functools.partial or a class with __call__ method. (TTS-52911) | |
| Multimedia: The new API method Image.EmbedInReport() can be used to embed Image objects in the TRF report file. (TTS-51957) | |
| Multimedia: The new API method TextMatchList.FilterByText() can be used to filter text matches using search words or regular expressions. (TTS-53052) | |
| Object API: GetAvailableChannelsAndProtocols() can be used to query available clusters/channels via API. (TTS-51929) | |
| Object API: A project component now has the methods SetReported and IsReported to set or query whether the component should be contained in the report. (TTS-52188) | |
| Object API: The performance and stability of the API client when many API calls are made in quick succession has been improved. (TTS-53265) | |
| Parameter set generator: Enhance the robustness and error messages for incorrect parameter sets. (TTS-53019) | |
| REST API: Aborting a postcondition via the /execution DELETE endpoint is no longer possible. (TTS-53764) | |
| REST API: The report generators can be reloaded via the endpoint /settings/reload. (TTS-54382) | |
| REST API: The trace analysis settings can be reloaded via the endpoint /settings/reload. (TTS-53838) |
Test management connector
| OpenText ALM Octane: Support for version 25.3. (TTS-54871) | |
| UserTestmanagement: TmUserAdapters are now reloaded consistently when updating the user libraries. It happens instantly if there is no connection or after the next logout it is connected. (TTS-52759) | |
| UserTestmanagement: Fixed a bug where not all user-defined properties were passed to the TmUserAdapter with their defined data type. (TTS-51915) | |
| UserTestmanagement: New method UpdateAttributeDefinitions for querying and updating the attribute definitions. (TTS-53066) |
ecu.test diagnostics
| TesterPresent handler does not violate the cycle time if job SetDiagTimeout is executed. (TTS-52598) | |
| An autofill button is available in the test step DIAG-SERVICE, which automatically fills in all the necessary parameters. When a new test step is created, the parameters are also filled automatically. (TTS-52197) | |
| BLF: Add support for J1939. (TTS-52432) | |
| Diagnostics: CDD and MDX/GDX data bases can be used in combination with the option OBDonUDS. (TTS-54218) | |
| Diagnostics: The selection lists for supported flags in OBDonUDS responses have been corrected.. (TTS-52637) | |
| DoIP: New job RecoverDiagnosticSession used for restarting all diagnostic connections of a port. (TTS-50599) | |
| In the generic test step DIAG-SERVICE, complex return parameters such as structs and arrays can now be stored in interpreted form. In addition, the complete diagnostic response is decoded and stored in the returned DiagServiceResult. (TTS-52642) | |
| MDF4: Add support for J1939. (TTS-50585) | |
| ODX/PDX: In the fault memory test step, DTCs can be added as expected values based on the description representation. (TTS-52636) | |
| ODX: Migration helper for deprecated diagnostic test steps has been removed. (TTS-50993) | |
| TesterPresent handler does not violate the cycle time if job SetDiagTimeout is executed. (TTS-52598) | |
| The DIAG-SERVICE test step no longer throws an error if coded values for return parameters cannot be converted to physical values because they are out of range. Instead, the coded values are now available as BITS representations for the corresponding return parameters. (TTS-52786) | |
| The generic Diag-Service test step lists all available return values in the report. (TTS-52640) | |
| The job CallServiceFunctional can handle the UDS NRC BRR. (TTS-50280) | |
| The jobs of the diagnostic ports are now grouped into subcategories in the action window. (TTS-53200) |
ecu.test calibration
| ecu.test calibration ports can now be configured to determine parameters of the XCP transport layer automatically from the A2L file. (TTS-46168) | |
| During registratioon of measure variables, the MAX_DTO upper limit for DAQ packet sizes gets taken into account. (TTS-51868) | |
| The used XCP transport layer can be selected at the ECU access in the test configuration. (TTS-46168) | |
| XCP over Ethernet: Error message about XCP frames with incorrect length when upon reception of very large TCP or UDP packets no longer occurs. (TTS-52894) | |
| XCPonCAN: Empty (0 byte) frames from the XCP slave are ignored. (TTS-52564) |
Interactive testing
| drive: For attributes with IDs the corresponding values are now displayed instead of the IDs. (TTS-54018) |
ecu.test lab
| In edit mode changes can be undone, redone or discarded in the navigation bar. (TTS-52639) | |
| The column width of the canvas is now a constant value and no longer changes when the window resizes or the zoom level is adjusted. (TTS-52638) | |
| The user interface appears in the new UI style of tracetronic. (TTS-52614) | |
| ecu.test lab: The new Call widget can be used to execute tool and port jobs. (TTS-52904) | |
| ecu.test lab: The new widget Selection allows writing a selectable value. (TTS-52579) | |
| ecu.test lab: Widgets are no longer configured in a dialog box but in a new bar on the right side of the screen. (TTS-53185) |
ecu.test code
| Release ecu.test code: ecu.test code enables access to tools and test variables in a Python environment. Further information can be found in the ecu.test code user guide and the release notes. (TTS-52321) |
Other new features
| ecu.test does not hang during report creation when the current directory is set to long paths. (TTS-53208) | |
| Changelog: The design of the changelog (HTML and PDF) has been fundamentally revised and standardized. (TTS-54855) | |
| Choosing the default signal viewer is now a local setting in the new Included programs section. All other options from the Signal visualization section have been moved to the Trace analysis section. (TTS-51630) | |
| Dependency management: Fixed an error that could occur when installing certain Python libraries via requirements.txt. (TTS-53533) | |
| Dependency management: Relative paths are also supported in requirements.txt files from library workspaces. (TTS-53263) | |
| Fix references: Fixed an incorrect relative project path resolution when the target project resides in a directory linked to the Packages folder via a file system junction. (TTS-52236) | |
| License Manager: Improved handling of per-user vs. system-wide settings. (TTS-52906) | |
| Logging: The output log files are now written non-blocking (asynchronously) to optimize the execution speed in case of a lot of log entries are created. (TTS-49648) | |
| Multi-Check: The error in the test run with a multi check test step in a subpackage without reporting has been fixed. (TTS-53050) | |
| Multimedia: OCR: The IDs of the matches listed in the report table now always correspond to the highlighting in the image. (TTS-52779) | |
| Package attributes: New attributes are persisted correctly. (TTS-53311) | |
| Packages: The obsolete attribute Alternative call representation has been removed. To use alternative call representation for packages, use the corresponding function from the mapping. (TTS-50704) | |
| Playbooks: Made the Export as Playbook option compatible with test.guide versions 1.197.0 and above. When converting projects to playbooks, ecu.test start and stop steps are now automatically added to restore previous behavior. (TTS-52739) | |
| Robust loading and saving of settings files. If corrupt settings files are loaded, a new one with default values is created instead. (TTS-53262) | |
| SCM: The Git integration in ecu.test now supports long file names in Windows. (TTS-53500) | |
| SCM: The performance of the git integration has been improved so that the execution of projects and packages with many referenced packages is noticeably faster in some cases. (TTS-52459) | |
| Test case coverage: Coverage files can now be loaded from test.guide. By specifying a project filter ID, all matching coverage files found in the filtered reports will be loaded. (TTS-49053) | |
| Test case coverage: Packages and folders from library workspaces are now displayed with the correct icons in the HTML file. (TTS-54426) | |
| Test case coverage: The HTML coverage report is now displayed page by page. Users can choose a page size of 25, 50, or 100 entries. (TTS-54429) | |
| Test case coverage: The name of the coverage XML file now contains the name of the test case itself to allow easier assignment of the coverage information to the respective test run in test.guide. (TTS-52765) | |
| Test execution: Fixed a bug where a failed call to a parallel package prevented further calls to this package from being made when the test was rerun. (TTS-51717) | |
| User documentation: A keyword index is now available in the help and allows you to find sections using alphabetically sorted terms. (TTS-51667) | |
| User documentation: Links to the ecu.test help now open the online help. If this is not available, the help from the installation folder is opened instead. (TTS-50939) | |
| When using the librosa library, caching problems caused by numba no longer occur. (TTS-52748) |