Port BUSACCESS - CAN 🛈

VECTOR-SIL-KIT access to CAN

Stimulation

This port supports all features described in Stimulation control.

Name

Available if

Default value

Valid values

Type

Description

Network name

string

Name of the network as defined in SIL-Kit Config yaml.

Controller name

string

Name of the controller as defined in SIL-Kit Config yaml.

Bit rate

‘500KB’

[‘10KB’, ‘20KB’, ‘50KB’, ‘83.333KB’, ‘100KB’, ‘125KB’, ‘250KB’, ‘500KB’, ‘666.667KB’, ‘800KB’, ‘1000KB’]

string

Bit rate

Mode

Standard

[Standard, Extended, All]

string

Addressing mode (Standard = 11bit, Extended = 29bit)

Receive error frames

☐

bool

Receive error frames

Trace format

ASC

[ASC, MDF4, PCAPNG]

string

Default file format for bus recordings. PCAPNG for bus is not supported by trace analysis

Bus-DB

string

Placeholder value for automatic E2E calculation

int

Whenever this value is specified for an E2E signal (e.g. CRC), upon transmission ecu.test automatically replaces it with the correct, calculated value. The purpose of this option is to allow transmission of arbitrary fixed values (unequal to the value chosen here). Leaving this option empty completely disables the feature.For more information see the documentation at Tool categories - Automatic E2E calculation

J1939 mode

Mode: ‘Extended’

☐

bool

Ignore the three most significant bits of the CAN-ID and J1939 source address. Extract signals from J1939-TP and ISOBus-ETP.

Transmission confirmation

☐

bool

Activates acknowledged sending. Bus-Write test steps and Send tool jobs block until the message was successfully transferred on the bus or the confirm timeout expired.

Timeout for transmission confirmation

1000

int

Period in miliseconds in which a message has to be sent successfully. Otherwise an error is created. (must not be larger than 64535ms). Is only used in active confirm mode.

ClearFrame

Erases the receiving buffer of given frame

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameId

int

Frame ID

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

Return value

Name

Available if

Default value

Valid values

Type

Description

result

ByteStream

ByteStream

CloseIsoTpSession

Closes the ISO TP session.

Parameterization

Return value

Name

Available if

Default value

Valid values

Type

Description

Return

[False, True]

bool

Session successfully closed

DeregisterFrameForInbox

Deregisters a frame that is streamed to the inbox

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameId

int

Frame ID

Inbox

object

Existing inbox

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

DeregisterStreamForInbox

Deregisters an ISO TP session.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

conId

int

Connection ID

DisableSendFrameCyclic

Deactivate cyclic transmission of a message with given id

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameId

int

Frame ID

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

GetFirstValue

Returns the first value of the signal received since the test case started.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameName

string

Frame name

NodeName

string

Name of the electronic control unit

RawValue

False

[False, True]

bool

If ‘True’, the Raw value is returned.

Reset

False

[False, True]

bool

If ‘True’ the first received value will be deleted after it has been read

SignalName

string

Signal name

GetLastReceptionTimestamp

Get the last reception timestamp in seconds

InitFrame

Registers the message ID for later use, e.g. ReadFrame

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameId

int

Frame ID

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

OpenIsoTpSession

Opens an ISO TP session.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

addressByte

ByteStream

Network target address or address extension (only relevant for extended or mixed addressing) - ByteStream of length 1

addressMode

0

int

Code of addressing mode - Integer (0: Standard Addressing | 1: Extended Addressing)

blockSize

0

int

Number (0 - 255) of consecutive frames that can be received without an intermediate flow control - Integer

fillByte

ByteStream

Byte to fill messages (optional) - ByteStream of length 1

flowControlAddressByte

ByteStream

Different network destination address or address extension for FlowControl (only relevant for extended and mixed addressing) - ByteStream of length 1

flowControlId

int

Message ID for flow control messages (optional) - Hex (optional Integer)

isExtended

-1

int

Use Extended CAN-ID format? (1=yes / 29 Bits; 0=no / 11 Bits; -1 = Use setting from TBC)

maxFrameLength

0

int

Maximum length of a frame in bytes (applies to both start, consecutive and last frames); if this value is set to 0, the maximum value described in ISO 10681-2 is used - Integer

requestId

int

Message ID for ECU requests - Hex (optional Integer)

responseId

int

Message ID for ECU responses - Hex (optional Integer)

separationTime

0

int

Minimal time separation between successive fragments 0x00..0x7F => 0..127ms, 0x80..0xf0 => reserved, 0xf1..0xf9 => 100.900µs, 0xfa..0xff => reserved - Integer

Return value

Name

Available if

Default value

Valid values

Type

Description

Return

int

Connection ID

ReadFrame

Reads the given frame ID (use InitFrame before!)

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

doDelete

False

[False, True]

bool

Deletes the Frame after reading if “True”

FrameId

int

Frame ID

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

Return value

Name

Available if

Default value

Valid values

Type

Description

result

ByteStream

ByteStream

ReadFrameEx

Reads the given frame ID (use InitFrame before!)

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

doDelete

False

[False, True]

bool

Deletes the Frame after reading if “True”

FrameId

int

Frame ID

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

Return value

Name

Available if

Default value

Valid values

Type

Description

result

object

CanFrame

RegisterFrameForInbox

Registers a frame to be streamed to an inbox.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameId

int

Frame ID

Inbox

object

Existing inbox

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

saveAsCanFrame

False

[False, True]

bool

If True, the frame is saved as a CanFrame object, else as a ByteStream

RegisterStreamForInbox

Registers an ISO TP session to be streamed into an Inbox.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

conId

int

Connection ID

inbox

object

Existing inbox

ResetFirstValue

Erases the first received value of the given signal

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

FrameName

string

Frame name

NodeName

string

Name of the electronic control unit

SignalName

string

Signal name

SendFrame

Sends message with given ID and data. Message ID must be registered in advance via the job “InitFrame”.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

DataByteStream

ByteStream

data to be send

FrameId

int

Frame ID

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

SendFrameCyclic

Cyclic transmission of a message with given ID and data. Message ID must be registered in advance via the job “InitFrame”.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

Count

int

Number of sending repetitions

DataByteStream

ByteStream

data to be send

FrameId

int

Frame ID

Interval

int

Cycle time in ms

isExtended

None

[False, True]

bool

Address format: True for 29 bit, False for 11 bit, None uses the setting “Mode” from the test bench configuration

SendStream

Send a data stream via ISO-TP.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

conId

int

Connection ID

data

object

Payload to be sent via ISO-TP

timeout

int

Timeout for sending the message in milliseconds

SetFlowControlCTS

Activates to always send a Flow Control “ContinueToSend” message in response to a segmented request. Also new values can be assigned to the internal parameters BlockSize and SeparationTime.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

BlockSize

int

Number (0 - 255) of consecutive frames that can be received without an intermediate flow control - Integer

If None the most recent setting from the test configuration, the OpenDiagSession job or the previous SetFlowControlCTS call is kept.

SeparationTime

int

Minimal time separation between successive fragments 0x00..0x7F => 0..127ms, 0x80..0xf0 => reserved, 0xf1..0xf9 => 100.900µs, 0xfa..0xff => reserved - Integer

If None the most recent setting from the test configuration, the OpenDiagSession job or the previous SetFlowControlCTS call is kept.

SessionId

object

Handle of the diagnostic session. This can be either the name of the SUT specified in the TCF, the handle returned by the OpenDiagSession job or None (can only be used if there is one SUT specified).

SetFlowControlWait

Activates to always send a Flow Control “Wait” messages in response to a segmented request. Note: While activated no segmented message can be received. Use the Job SetFlowControlCTS to reset this behaviour.

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

SessionId

object

Handle of the diagnostic session. This can be either the name of the SUT specified in the TCF, the handle returned by the OpenDiagSession job or None (can only be used if there is one SUT specified).

WaitTimeInterval

0

int

Wait time interval in ms. If set to 0, Flow Control “Wait” messages are only sent once, to respond to a segmented request. If set to a value greater than 0, Flow Control “Wait” messages will be sent periodically with the given interval in between.

StartPlayback

Start playback of a recording

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

AscFile

uri

ASC file

Return value

Name

Available if

Default value

Valid values

Type

Description

handle

int

A handle that can be used to stop the playback

StopPlayback

Stop a running playback

Parameterization

Parameter

Name

Available if

Default value

Valid values

Type

Description

handle

int

A handle obtained from StartPlayback