General Structure of xml file¶

The structure of the FIU in ecu.test is defined using an XMLfile. Its structure is described in the following.

The pins are defined in the section PIN-INFO-SET. Therefore, a PIN element is defined for each pin to be provided. In this element is defined whether the pin is of type Master-Pin, Standard-Pin or Multipin. Additionally is to be defined which states should are to be supported by the pin ant which COM groups the pin is member of. Furthermore, a description can be set, which is shown as additional information in ecu.test.

The additional properties CANAL-NUMBER, MODULE-ID and BIT-COM1/BIT-COM2 are to be used depending on the used FIU. That is why they are not further describet at this point.

In the section MULTIPIN-MAPPING, multiple physical Standard-Pins can be assigned to a single Multipin. Therefore, a beforehand in section PIN-INFO-SET defined Multipin is assigned to a list of also beforehand in PIN-INFO-SET defined Standard-Pins. In ecu.test, only the Multipin will be provided to be switched, but on execution, all associated pins will be switched to the selected state instead.

Info

All associated pins have to support all states provided by the Multipin!

<?xml version="1.0" encoding="utf-8"?>
<FIU xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
	<PIN-INFO-SET>
	    <!-- Master PINs -->
	    <!-- Pin-Name as attribute dKey -->
		<PIN dkey="X MASTER GND">
		    <!-- xsi:type == "FIU_COMPinInfo" for Master-Pins -->
			<DVALUE xsi:type="FIU_COMPinInfo">
				<DESCRIPTION xsi:type="unicode">UBATT +9V</DESCRIPTION>
				<!-- TYPE == "COMINPUT" for Master-Pins -->
				<TYPE xsi:type="string">COMINPUT</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM1</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">UBATT12</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<MODULE-ID xsi:type="integer">-1</MODULE-ID>
			</DVALUE>
		</PIN>
		<PIN dkey="X MASTER UBATT">
			<DVALUE xsi:type="FIU_COMPinInfo">
				<DESCRIPTION xsi:type="unicode">COM-BRIDGE1</DESCRIPTION>
				<TYPE xsi:type="string">COMINPUT</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM2</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">RESERVED1</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<MODULE-ID xsi:type="integer">-1</MODULE-ID>
			</DVALUE>
		</PIN>
		<!-- Standard PINs -->
		<PIN dkey="Pin1">
		    <!-- xsi:type == "FIU_STDPinInfo" for Standard-Pins -->
			<DVALUE xsi:type="FIU_STDPinInfo">
				<DESCRIPTION xsi:type="unicode">Modul 2A13 Pin IN1</DESCRIPTION>
				<!-- TYPE == "STD" for Standard-Pins -->
				<TYPE xsi:type="string">STD</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM1</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM2</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">GROUND</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">UBATT12</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">RESERVED1</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<CANAL-NUMBER xsi:type="integer">1</CANAL-NUMBER>
			</DVALUE>
		</PIN>
		<PIN dkey="Pin2">
			<DVALUE xsi:type="FIU_STDPinInfo">
				<DESCRIPTION xsi:type="unicode">Modul 2A13 Pin IN2</DESCRIPTION>
				<TYPE xsi:type="string">STD</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM1</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM2</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">GROUND</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">UBATT12</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">RESERVED1</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<CANAL-NUMBER xsi:type="integer">2</CANAL-NUMBER>
			</DVALUE>
		</PIN>
		<!-- Multipin -->
		<PIN dkey="SymbolicMultipin1">
		    <!-- xsi:type == "FIU_STDPinInfo" for Multipins -->
			<DVALUE xsi:type="FIU_STDPinInfo">
				<DESCRIPTION xsi:type="unicode">Symbolic Pin to switch pins "MappedPin1" and "MappedPin2" at once</DESCRIPTION>
				<!-- TYPE == "MULTI" for Multipins -->
				<TYPE xsi:type="string">MULTI</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM1</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM2</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">GROUND</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">UBATT12</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">RESERVED1</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<CANAL-NUMBER xsi:type="integer">-1</CANAL-NUMBER>
			</DVALUE>
		</PIN>
		<!-- more Standard PINs -->
		<PIN dkey="MappedPin1">
			<DVALUE xsi:type="FIU_STDPinInfo">
				<DESCRIPTION xsi:type="unicode">Modul 2A14 Pin IN1</DESCRIPTION>
				<TYPE xsi:type="string">STD</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM1</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM2</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">GROUND</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">UBATT12</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">RESERVED1</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<CANAL-NUMBER xsi:type="integer">3</CANAL-NUMBER>
			</DVALUE>
		</PIN>
		<PIN dkey="MappedPin2">
			<DVALUE xsi:type="FIU_STDPinInfo">
				<DESCRIPTION xsi:type="unicode">Modul 2A14 Pin IN2</DESCRIPTION>
				<TYPE xsi:type="string">STD</TYPE>
				<CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">NORMAL</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">BREAK</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM1</ALLOWED-CONNECTION>
					<ALLOWED-CONNECTION xsi:type="string">COM2</ALLOWED-CONNECTION>
				</CONNECTION>
				<COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">GROUND</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">UBATT12</ALLOWED-COM-GROUP>
					<ALLOWED-COM-GROUP xsi:type="string">RESERVED1</ALLOWED-COM-GROUP>
				</COM-GROUP>
				<CANAL-NUMBER xsi:type="integer">4</CANAL-NUMBER>
			</DVALUE>
		</PIN>
	</PIN-INFO-SET>
	<!-- Mapping info -->
	<MULTIPIN-MAPPING>
	    <!-- Multipin-Name to map as attribute dKey -->
		<MULTIPIN dkey="SymbolicMultipin1">
			<DVALUE xsi:type="baseMultipinInfo">
			    <!-- List of Pin-Names to be mapped -->
				<PINLIST>
					<MAPPED-PIN-NAME xsi:type="string">MappedPin1</MAPPED-PIN-NAME>
					<MAPPED-PIN-NAME xsi:type="string">MappedPin2</MAPPED-PIN-NAME>
				</PINLIST>
			</DVALUE>
		</MULTIPIN>
	</MULTIPIN-MAPPING>
</FIU>