MAGNA: BluePiraT

Legacy/internal identifier: BluePiraT

Vendor information

Vendor

Web page

Product name

Version

MAGNA Telemotive AG

https://www.telemotive.de

BluePiraT

Telemotive Client Libraries 3.4 / 4.1 / 4.2.0 / 4.2.2

Categories

MDL 🛈

APL 🛈

BAN 🛈

BMA 🛈

SVC 🛈

DGN 🛈

FIU 🛈

EES 🛈

FCT 🛈

DBG 🛈

IMG 🛈

AUDIO 🛈

ENVSIM 🛈

ENVCOM 🛈

Signal recordings 🛈

File format

Comment

*.asc

*.blf

Platform

Operating system

Support

Windows

✓

Linux

Ports

Specifics

This interface allows, by means of hardware, direct CAN, LIN and FlexRay bus access. It supports the test steps read signal, read signal group (all bus systems) as well as monitor (CAN only) and supports signal recording (all bus systems).

For the interface to be available, the directory including the files BPNGClientLib.dll and BPNGOnlineStreamingLib.dll need to be referenced in ToolLibs.ini under the section BluePiratBusAccessLib as dllLocation. These files are available as Telemotive Client Libraries from MAGNA Telemotive GmbH. The interface was tested against versions 3.4.3.0, 4.1.0.38, 4.2.0.40, and 4.2.2.24.

Recording of bus activity is performed on the logger’s hard disk with subsequent download in various formats, either individually for each bus / port, or jointly across all connected busses, as a tool log recording.

Caution

When using this interface, the port start phase during test case initialization may occasionally take extremely long (up to several minutes).

Info

If you use BLF as output format, a copy of the file binlog.dll must be in %windir%/System32/. The file can be obtained from Vector Informatik GmbH.

FormatIds for DownloadAllTraceData Job

Since BluePirat Version 3.4.3

  • APN: APN serial format

  • ASCHEX: ASCII format that writes binary data as hex values

  • BLF: Binary Logging Format - Vector Informatik

  • CANCORDER: CANCorder format

  • CANOE: CANOE ASCII format

  • DLT_BMW: BMW specific DLT Format

  • ESO_TRACE: Audi specific ESO Format

  • GNLOG: GNLog format

  • GPX: GPS Exchange format

  • IMG: DataAnalyser IMG format

  • KML: KML format for GPS data

  • KMZ: KMZ format for GPS data

  • MDF: Measurement data format - Vector Informatik

  • MDF_BUS_LOG_4_10: MDF 4.10 format for bus logging

  • MDF_CAN_SIG: MDF format based on CAN signals

  • MDF_CCP_XCP_SIG: MDF format based on CCP & XCP signals.

  • MDF_SIG_LOG_4_10: MDF 4.10 format for signal logging

  • MPEG4_BLOCKS: Camera format seperated blocks

  • MPEG4_JOINED: Camera joined videos

  • NMEA: Raw format for GPS data

  • OP2: MOST OP” format

  • RAW_ETHERNET: Raw ethernet format

  • RAW_SERIAL: Raw Serial Format

  • SERIAL_DEBUG: Serial Format with “new Line”-packaging

  • STA: Serial Trace Analyser format

  • TCLOG: Trace Client format

  • TCLOG_TS: Trace Client format plus time stamps

  • TCPDUMP: TCP dump (*.pcap) format

  • TMASC: Telemotive ASCII format

  • TMBIN: Telemotive binary format

  • TS: Raw isochrone format

  • XTMT: Extended Telemotive trace file format

Additionally since BluePirat version 4.1

  • QXDM_RAW_SERIAL: Like RAW_SERIAL but only for tty and with file extension *.qmdl

Additionally since BluePirat version 4.2

  • PCAPNG: Wireshark - pcapng (*.pcapng) format