Port APPLICATION - Standard 🛈¶
Stimulation¶
This port has no stimulus capabilities.
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Device name |
‘CCPsim’ |
string |
Name of access interface |
||
Device channel |
1 |
int |
Name of access interface |
||
Devices |
CCP |
[CCP, XCP] |
string |
Driver of access interface |
|
Network name |
Devices: ‘Ethernet’ |
string |
Name of ethernet network (for network based access mode). Leave empty for channel based access mode. |
||
Check access |
☑ |
bool |
Check device access after tool startup. |
||
A2L file |
uri |
A2L file used by the port |
|||
Hex file |
uri |
Hex file used by the port |
|||
Mirror cache |
Ignore |
[Ignore, Disable, Enable] |
uri |
Enable or diable the mirror cache after initialisation of the device. Only has an effect on devices that are created by ecu.test. |
|
Automatic recording |
☐ |
bool |
If this option is active, all signals used in the test case are automatically registered for recording. |
||
Default acquisition rate |
‘Tool-Default’ |
string |
Declaration of measurement acquisition rate used as alternative in case no acquisition rate is set in the test step (’*’ and ‘?’ can be used as wildcard). “Tool-Default” activates the use of the standard acquisition rate of the tool |
||
Procrastination for validation |
-1 |
int |
Defines the procrastination used for validating a written calibration value. If set to “-1” no validation will be performed. |
||
Validation tolerance for calibration |
3 |
float |
Defines the tolerance used for validating a written calibration value. The value must be given in percent. |
||
Force upload of calibration values |
☐ |
bool |
From CANape 12 SP8: Forces uploading calibration values. This is necessary when a calibration value is also written by the control unit software. |
||
Do not transfer A2L and HEX file to CANape |
☐ |
bool |
This setting allows to skip the time for copying and reading the A2L and HEX files into CANape, if a CANape project which already includes the correct file is used. |
Jobs 🛈¶
DownloadWorkbase¶
Download WP/RP from data set to control unit
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
force |
False |
[False, True] |
bool |
GetAquisitionRates¶
Provides a list of all acquisition rates
IsDeviceRunning¶
Returns if the ECU is online.
Parameterization
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
result |
[False, True] |
bool |
StartDevice¶
Establishes the connection from CANape to the ECU
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
download |
False |
[False, True] |
bool |
Activates the automatic download during “GoOnline”. |
|
timeout |
2000 |
float |
Timeout for the start in ms. |
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
result |
[False, True] |
bool |
StopDevice¶
Disconnects the ECU from CANape
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
timeout |
2000 |
float |
Timeout for the stop in ms. |
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
result |
[False, True] |
bool |