Port IMAGE - DEFAULT 🛈¶
Default port for interaction with GenICam cameras
Stimulation¶
This port has no stimulus capabilities.
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Camera settings |
|||||
Camera |
Camera settings |
[ONLINE] |
string |
The name, model and serial number of the available cameras are listed. The selected camera is identified by its serial number when the port is started. |
|
Pixel format |
Camera settings |
[ONLINE] |
string |
A list of the camera’s supported pixel formats filtered by formats that are supported by ecu.test. |
|
Width |
Camera settings |
640 |
int |
Width of the camera frame. |
|
Height |
Camera settings |
480 |
int |
Height of the camera frame. |
|
Frame rate |
Camera settings |
30 |
int |
The desired frame rate for capturing |
|
Show binary timestamp in video |
☐ |
bool |
The current timestamp of the camera in nanoseconds is stored in a 64 bit unsigned integer and written to the first 64 pixels in the upper left corner of the frame. |
||
Live preview |
☐ |
bool |
Streams a live preview on the configured network port. The live stream is available under the toolhost’s IP address and the configured port, e.g. for a local tool connection: http://127.0.0.1:<port> |
||
Open preview window |
Live preview |
☑ |
bool |
Opens a preview window upon loading the configuration. This window displays the current output of the image source as a livestream and will remain open as long as the test configuration is active. |
|
Port |
Live preview |
‘<auto>’ |
string |
The network port that will be used for live streaming. Every live stream needs an unique port if live streaming is enabled for multiple video sources. If the value is set to <auto> a free network port will be defined by the system. |
|
Show text overlay in video recordings |
☐ |
bool |
Adds a text overlay with the format “timestamp package name” in the bottom left corner of video recordings. |
Jobs 🛈¶
GetProperty¶
Returns a property’s value.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
prop |
‘Width’ |
string |
Name ofthe property. Get all available names with ListProperties job. |
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
return |
object |
Returns the current value of the given property. |
ListProperties¶
Lists all available properties for device.
Parameterization
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
return |
object |
List with names of all properties. |
SetProperty¶
Sets a property’s value.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
prop |
‘Width’ |
string |
Name ofthe property. Get all available names with ListProperties job. |
||
value |
object |
New value for the given property. |