Port IMAGE - DEFAULT 🛈¶

Default port for interaction with MGB frame grabbers

Stimulation¶

This port has no stimulus capabilities.

Specifics¶

With the tooljobs GetConfigProperties and SetConfigProperties the configurations that are also accessible via the webinterface of the MGB can be read and changed while running a test case. A list of the available options can be found on the Digiteq MGB online documentation or on the device itself at http://<MGB_IP>/manual/ctlsock.html#section_configuration_properties.

Properties 🛈¶

Name	Available if	Default value	Valid values	Type	Description
IP address		‘192.168.1.200’		string	IP address of the MGB framegrabber.
Control port		53000		int	Port number to the Control Socket Protocol.
Timeout		10		int	Timeout of the socket connection in seconds.
Frame rate		25		int	Frame rate of the video signal.
Video protocol		‘H264-MPEGTS-TCP’	[‘H264-MPEGTS-TCP’, ‘JPEG-MUX-TCP’]	string	Protocol for video streaming.
Show binary timestamp in video		‘manually’	[‘view’, ‘hide’, ‘manually’] Display values: ‘view’: ‘View’ ‘hide’: ‘Hide’ ‘manually’: ‘Manually’	string	Adds the current time stamp of the frame grabber in binary format. “Manual” leaves existing (manual) configurations unchanged.
Mirror image vertically		☐		bool	Mirrors the image vertically for image reading test step and video streaming.
Live preview		☐		bool	Streams a live preview on the configured network port. The live stream is available under the toolhost’s IP address and the configured port, e.g. for a local tool connection: http://127.0.0.1:<port>
Open preview window	Live preview	☑		bool	Opens a preview window upon loading the configuration. This window displays the current output of the image source as a livestream and will remain open as long as the test configuration is active.
Port	Live preview	‘<auto>’		string	The network port that will be used for live streaming. Every live stream needs an unique port if live streaming is enabled for multiple video sources. If the value is set to <auto> a free network port will be defined by the system.
Show text overlay in video recordings		☐		bool	Adds a text overlay with the format “timestamp package name” in the bottom left corner of video recordings.

Jobs 🛈¶

GetConfigProperties¶

Reads the settings of the grabber and saves them to a dictionary.

Parameter

Name	Available if	Default value	Valid values	Type	Description
properties		[]		object	A list of settings whose current values are to be read by the device. If the list is empty, all settings are read.

GetStatus¶

Returns the current status, such as firmware version or detected video resolution, of the grabber as a dictionary.

Reboot¶

Restarts the MGB.

SetConfigProperties¶

Changes the settings of the Grabber.

Parameter

Name	Available if	Default value	Valid values	Type	Description
properties		{}		object	A dictionary with the settings that should be set. Settings that do not exist are ignored.

SetVideoMarker¶

Places a 2x2 checkerboard marker in the upper right corner of the video stream for the specified number of frames.

Parameter

Name	Available if	Default value	Valid values	Type	Description
duration		3		int	Display duration in frames.
size		10		int	Size of the video marker in pixels.