Port BUSACCESS - LIN 🛈¶
PEAK-HW access to LIN
Stimulation¶
This port has no stimulus capabilities.
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Channel number |
‘1’ |
string |
Selection of channel number if there is more than one controller of same type. |
||
Baud rate |
19200 |
float |
Baudrate. Numbers lesser than 100 are interpreted as kbit/s, numbers larger than 100 as bit/s |
||
Do not stop RBS |
☐ |
bool |
Restbus simulation stays active beyond test case execution. |
||
LIN version |
‘1.3’ |
[‘1.3’, ‘2.0’] |
string |
LIN protocol version to be used. Only affects calculation and validation of the frame checksum. 1.3 = received frames must have a classic checksum. 2.0 = received frames may have enhanced or classic checksum. If the database does not define a checksum mode for a specific frame to be sent, this option will be taken into account to use either classic (1.3) or enhanced (2.0) checksum mode. |
|
Bus-DB |
string |
Jobs 🛈¶
ClearFrame¶
Erases the receiving buffer of given frame
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
FrameId |
int |
Frame ID |
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
result |
ByteStream |
ByteStream |
DeregisterFrameForInbox¶
Ungeristers a frame that is being streamed to an inbox
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
FrameId |
int |
Frame ID |
|||
Inbox |
object |
Existing inbox |
EnableFrame¶
Makes this slave respond (or not respond) to the specified ID. You can use this instead of “Change PDU timing”. The frame must have been initialized via “InitFrame”.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
enable |
[False, True] |
bool |
Enable or disable |
||
frameId |
int |
Frame ID |
GetFirstValue¶
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
FrameName |
string |
Frame name |
|||
NodeName |
string |
Name of the electronic control unit |
|||
RawValue |
False |
[False, True] |
bool |
If ‘True’, the Raw value is returned. |
|
Reset |
False |
[False, True] |
bool |
If ‘True’ the first received value will be deleted after it has been read |
|
SignalName |
string |
Signal name |
InitFrame¶
Registers the frame for use with other jobs
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
FrameId |
int |
Frame ID |
ReadFrame¶
Reads the given frame ID (use InitLinFrame before!)
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
doDelete |
False |
[False, True] |
bool |
Deletes the Frame after reading if “True” |
|
FrameId |
int |
Frame ID |
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
result |
ByteStream |
ByteStream |
ReadFrameEx¶
Reads the given frame ID (use InitLinFrame before!)
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
doDelete |
False |
[False, True] |
bool |
Deletes the Frame after reading if “True” |
|
FrameId |
int |
Frame ID |
Return value
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
result |
object |
LinFrame |
RegisterFrameForInbox¶
Registers a frame to be streamed to an inbox.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
FrameId |
int |
Frame ID |
|||
Inbox |
object |
Existing inbox |
|||
saveAsLinFrame |
False |
[False, True] |
bool |
If True, the frame is saved as a LinFrame object, else as a ByteStream |
ResetFirstValue¶
Erases the first received value of the given signal
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
FrameName |
string |
Frame name |
|||
NodeName |
string |
Name of the electronic control unit |
|||
SignalName |
string |
Signal name |
SendFrame¶
All in one: Set data, temporarily enable a frame, and send a master request. Frame ID must be registered in advance via the job “InitFrame”.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
checkSumMode |
‘Default’ |
[‘Enhanced’, ‘Classic’, ‘Default’] |
string |
Mode of the checksum calculation. With default the LIN version from the TBC is used for the determination. |
|
DataByteStream |
ByteStream |
data to be send |
|||
FrameId |
int |
Frame ID |
SetFrame¶
Sets the data to be sent for the entire message at once (instead of for each individual signal). Additionally, the message has to be activated via “Change PDU timing” or the job “EnableFrame”.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
checkSumMode |
‘Default’ |
[‘Enhanced’, ‘Classic’, ‘Default’] |
string |
Mode of the checksum calculation. With default the LIN version from the TBC is used for the determination. |
|
data |
ByteStream |
Data as ByteStream |
|||
frameId |
int |
Frame ID |