Port MODELACCESS 🛈¶
Stimulation¶
This port has no stimulus capabilities.
Supported execution modes¶
See also: Temporal behaviour: Real time and simulation time modes
Preferred time source/mode: Continuous simulation time
- Real-time:
To use real-time mode, the Test configuration in the Execution tab must be configured as the source ‘real time’.
- Continuous simulation time:
To use the continuous simulation mode, the port in the Test configuration in the Execution tab must be selected and the mode set to ‘continuous’.
Info
The following modes are not supported: Stepwise simulation time
Jobs 🛈¶
SendSignalSample¶
PROTOTYPE: Sends a single signal sample on the FEP bus. Transmission is neither synchronized with other signals or senders nor are other senders of the same signal muted. Values can be specified for any of the signal elements. Element values not specified are set to the values received last on the bus or to the default values if the signal has never been present on the bus before.
CAUTION: The first invocation of this job for the specified signal might not send a sample of this signal as expected (the sample may have an incorrect timestamp or may not be sent at all). To workaround this problem, make sure that the specified signal is also used in a normal read or write test step elsewhere in your test case.
Parameterization
Parameter
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
ElementValues |
{} |
object |
Dictionary in which an element path is mapped to a value. |
||
SignalName |
string |
Name of the FEP signal. |