Port BUSACCESS - GENERIC_SOCKETADAPTOR 🛈¶
Generic bus access for SocketAdaptor ports
Stimulation¶
This port has no stimulus capabilities.
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Bus identifier |
string |
Logical name of the bus system |
|||
Model port |
string |
Port ID (e.g. “MDL01”) of the model port via which the model access is to be performed. This property can remain empty if there is exactly one model port. If there is more than one model port, this property must be set. |
|||
Bus-DB |
string |
Bus-database (This bus-database is usually taken from the test configuration. Please note that the bus-database is not automatically transferred to the tool, but must be stored there manually.) |
|||
Bus path |
‘slave_?Appl/BusSystems/Ethernet/Ethernet_K?’ |
string |
Base path of the model variables for the bus signals and messages. The Rx and Tx path specifications refer to this base path. The bus path may contain the single character wildcard “?”. |
||
Rx path |
‘%(receiver)s/RX/IPDUs/%(pdu)s/Signals/%(signal)s/Value’ |
string |
Pattern of model path for signal reading |
||
Tx path |
‘%(node)s/TX/IPDUs/%(pdu)s/Signals/%(signal)s/Overwrite Value’ |
string |
Pattern of model path for signal manipulation |
||
Tx-Switch path |
‘%(node)s/TX/IPDUs/%(pdu)s/Signals/%(signal)s/Switch Value’ |
string |
Pattern of model path to the switch for signal manipulation |