Port MODELACCESS - DEFAULT 🛈¶
Model access
Stimulation¶
This port has no stimulus capabilities.
Supported execution modes¶
See also: Temporal behaviour: Real time and simulation time modes
Preferred time source/mode: Real-time
- Real-time:
To use real-time mode, the Test configuration in the Execution tab must be configured as the source ‘real time’.
Info
The following modes are not supported: Stepwise simulation time, Continuous simulation time
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Support for online model querying |
☑ |
bool |
(De-)Activates the interface for online querying of model information by the test configuration |
||
Alive signal |
☐ |
bool |
Activates an alive signal on port startup which toggles from 0 to 1 and back. |
||
Interval |
Alive signal |
1 |
int |
The transmission interval in seconds. |
|
Alive signal variable path |
Alive signal |
string |
The variable path the alive signal is written to. |
||
Variable path for the connection state |
Alive signal |
string |
This variable is 1 while the port is used for test execution. Meanwhile the alive signal is sent. |
||
Activate alarm check |
☐ |
bool |
Avoids writing variables if the test bench is in alarm state. |
||
Alarm state variable path |
Activate alarm check |
string |
Variable path of the alarm state of the test bench. An active Alarm corresponds to a value greater than 0. |