Port MODELACCESS 🛈¶
Stimulation¶
This port has no stimulus capabilities.
Supported execution modes¶
See also: Temporal behaviour: Real time and simulation time modes
Preferred time source/mode: Real-time
- Real-time:
To use real-time mode, the Test configuration in the Execution tab must be configured as the source ‘real time’.
Info
The following modes are not supported: Stepwise simulation time, Continuous simulation time
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Model file |
string |
Path to the model relative to the project file. |
|||
Alias file |
uri |
Alias file that should be loaded. The path must be absolute and end in”.alias”. |
|||
Parameter file |
uri |
Parameter file to be loaded at startup. The path must be absolute and end in “.param”. |
|||
Real-time mode |
‘Simulation’ |
[‘Hardware Synchronized’, ‘Simulation’, ‘Software Synchronized’, ‘Simulation with no data loss’, ‘Simulation with low priority’] |
string |
Real-time mode for model execution |
|
Time factor |
1.0 |
float |
Value calculation for determining step size |
||
Recording cycle |
0.001 |
float |
Sampling time for recording in [s] |
||
Support for online model querying |
☑ |
bool |
(De-)Activates the interface for online querying of model information by the test configuration |