Port MODELACCESS - USBAD8DAC2 🛈¶
Model access
Stimulation¶
This port has no stimulus capabilities.
Supported execution modes¶
See also: Temporal behaviour: Real time and simulation time modes
Preferred time source/mode: Real-time
- Real-time:
To use real-time mode, the Test configuration in the Execution tab must be configured as the source ‘real time’.
Info
The following modes are not supported: Stepwise simulation time, Continuous simulation time
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Device number |
0 |
int |
Describes the device number of the card to be opened. |
||
Support for online model querying |
☑ |
bool |
(De-)Activates the interface for online querying of model information by the test configuration |
||
Inputs in Volt |
☑ |
bool |
Make inputs in Volt or as digital values? |
||
Values displayed in Volt |
☑ |
bool |
Return read values in Volt or as digital values? |
||
Voltage range setting |
‘SINGLE-ENDED (SE) - MODE_BI_10V’ |
[‘SINGLE-ENDED (SE) - MODE_BI_10V’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_20V’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_10V’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_5V’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_4V’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_2V5’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_2V’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_1V25’, ‘DIFFERENTIAL-ENDED (DI) - MODE_BI_1V’] |
string |
Voltage settings. |