Technica: CM¶
Vendor information
Vendor |
Web page |
Product name |
Version |
|---|---|---|---|
Technica Engineering GmbH |
CM |
Categories
MDL 🛈 |
APL 🛈 |
BAN 🛈 |
BMA 🛈 |
SVC 🛈 |
DGN 🛈 |
FIU 🛈 |
EES 🛈 |
FCT 🛈 |
DBG 🛈 |
IMG 🛈 |
AUDIO 🛈 |
ENVSIM 🛈 |
ENVCOM 🛈 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
✓ |
✓ |
✓ |
✓ |
Signal recordings 🛈
File format |
Comment |
|---|---|
*.asc |
|
*.mf4 |
BUSACCESS - CAN(-FD) ports support MDF4 bus logging only. XCP ports support signal-based MDF4 recording. |
*.pcapng |
BUSACCESS - CAN(-FD) ports will use linktype=227. The resulting files cannot be processed by trace analysis. |
Platform
Operating system |
Support |
|---|---|
Windows |
✓ |
Linux |
Ports¶
Info
Ports marked with ✦ are part of the Add-on ecu.test calibration (subject to a separate license)
Specifics¶
This interface allows, by means of hardware, direct CAN and CAN-FD as well as FlexRay bus access. It supports the test steps read signal and read/write signal group (all bus systems) as well as monitor (CAN only), and supports signal recording (all bus systems), Raw diagnostics with KWP2000 over ISO-TP (CAN only), the Mini residual bus simulation (CAN only), and Additional functions of the close-to-hardware bus connections (all bus systems).
Supported hardware and drivers
Technica CM
To use the driver in ecu.test, you have to install the TE-Driver and ensure the installation directory is listed in the PATH variable.
Peculiarities and Restrictions
The “CAN FD tolerant” mode of operation, where classical CAN 2.0 frames are transmitted and received on a bus where other participants exchange proper CAN FD frames, is not supported.
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Network interface card |
[ONLINE] |
string |
Please select the network adapter to access the CM boards |
||
Timeout for tool call ❲in sec.❳ |
‘600’ |
string |
Timeout after which a tool call is aborted. |