IPETRONIK: ETHOS¶

Vendor information

Vendor	Web page	Product name	Version
IPETRONIK GmbH & Co. KG	https://www.ipetronik.com/de/datenlogger/ethos.html	ETHOS	2022.10.11

Operating system	Support
Windows	✓
Linux	✓

Specifics¶

This tool connection allows you to start, stop and then retrieve recordings from IPETRONIK ETHOS data loggers.

Preparation¶

The following additional licenses are required to use the connection: SCRIPT_ENG, UI_OPENABK.

It is not yet possible to set the channels to be recorded via ecu.test. Instead, they must already be defined in the configuration file of the logger (.ccmc) and assigned to a data set. In addition, the tool jobs to start and stop the recordings require a trigger. To set this up in the configuration file, the following steps are necessary:

Create a new script and insert the following:

int trigger_taster;

ON EVENT HID_KEY (HID_KEY_TRIGGER, HID_KEY_EVENT_PRESS, 0) {
    trigger_taster=1;
}
ON EVENT HID_KEY (HID_KEY_TRIGGER, HID_KEY_EVENT_RELEASE, 0) {
    trigger_taster=0;
}

SIGNAL 'Trigger_Taster' (10, trigger_taster);

Create a new standard trigger and enter "Trigger_Taster" = 1 as the trigger formula
Create a second standard trigger and enter "Trigger_Taster" = 0 as the trigger formula
Make the following settings in the Generate tab of the dataset to be recorded:
- Select Pause is inverted start as Mode
- Select the first previously created trigger as Start-trigger
- Select At shutdown and trigger as Completion-condition
- Select the second previously created trigger as Trigger

Properties 🛈¶

Name	Available if	Default value	Valid values	Type	Description
General
IP address	General	‘203.0.113.1’		string	IP address of the data logger.
Configuration file ❲optional❳	General			string	Path to a configuration file (*.ccmc) that is available on the test host. The path can be given absolute or relative to the workspace. The logger will be restarted to apply the configuration. If the field is empty, the current settings of the logger are used.
SSH Connection to ETHOS logger
SSH port	SSH Connection to ETHOS logger	22		int	Host port
SSH username	SSH Connection to ETHOS logger			string	Username for the authentication.
Authentication method	SSH Connection to ETHOS logger	Keyfile	[None, Password, Keyfile] Display values: None: Without authentication Password: Password Keyfile: Private key file	string	Method used to log into the remote system.
SSH key path	SSH Connection to ETHOS logger » Authentication method: ‘Keyfile’			string	Path to the SSH private key for public key authentication. Can be specified absolute or relative to the tool host base path. If no tool host base path is set, the path can be relative to the workspace. Supported key formats: RSA, DSA, ECDSA and ED25519
SSH password	SSH Connection to ETHOS logger » Authentication method: ‘Password’			string	Password of the specified user. Attention: The password is stored unencrypted in the TBC!
File transfer protocol	SSH Connection to ETHOS logger	SFTP	[SFTP, SCP]	string	Sets the protocol used to transfer files. If possible, SFTP should be preferred because it is the more stable and secure protocol.
Timeout for tool call ❲in sec.❳		‘600’		string	Timeout after which a tool call is aborted.

Jobs 🛈¶

DownloadLatestRecordings¶

Copies the recorded datasets from the ETHOS logger to the test’s report folder.

StartRecording¶

Starts a recording as defined in the configuration file.

StopRecording¶

Stops a recording and creates a recording file.