ZLG: zlgcan¶
Vendor information
Vendor |
Web page |
Product name |
Version |
|---|---|---|---|
Guangzhou Zhiyuan Electronics Co. Ltd. |
zlgcan |
dll 25.7.23.9 |
Categories
MDL 🛈 |
APL 🛈 |
BAN 🛈 |
BMA 🛈 |
SVC 🛈 |
DGN 🛈 |
FIU 🛈 |
EES 🛈 |
FCT 🛈 |
DBG 🛈 |
IMG 🛈 |
AUDIO 🛈 |
ENVSIM 🛈 |
ENVCOM 🛈 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
✓ |
✓ |
✓ |
✓ |
✓ |
Signal recordings 🛈
File format |
Comment |
|---|---|
*.asc |
|
*.mf4 |
BUSACCESS - CAN(-FD) ports support MDF4 bus logging only. XCP ports support signal-based MDF4 recording. |
*.pcapng |
BUSACCESS - CAN(-FD) ports will use linktype=227. The resulting files cannot be processed by trace analysis. |
Platform
Operating system |
Support |
|---|---|
Windows |
✓ |
Linux |
Ports¶
Info
Ports marked with ✦ are part of the Add-on ecu.test calibration (subject to a separate license)
Specifics¶
This interface allows, by means of hardware, direct CAN and CAN-FD bus access. It supports the test steps read signal, read/write signal group as well as monitor and supports signal recording, Raw diagnostics with KWP2000 over ISO-TP, the Mini residual bus simulation and Additional functions of the close-to-hardware bus connections.
Supported drivers
No driver needs to be installed for use in ecu.test. However, it is necessary that the
file zlgcan.dll and the corresponding kerneldlls directory are located in a
directory mentioned in the %PATH% environment variable.
Only the 64-bit version is supported.
Tested hardware:
ZLG USBCANFD-200U
Properties 🛈¶
Name |
Available if |
Default value |
Valid values |
Type |
Description |
|---|---|---|---|---|---|
Hardware |
[‘<online query>’, ‘<no toollib start>’] |
string |
Choose the hardware which should be used |
||
Timeout for tool call ❲in sec.❳ |
‘600’ |
string |
Timeout after which a tool call is aborted. |