Port APPLICATION - Standard¶

Stimulation¶

This port has no stimulus capabilities.

Properties 🛈¶

Name	Available if	Default value	Valid values	Type	Description
Device name		‘CCPsim’		string	Name of access interface
Device channel		1		int	Name of access interface
Devices		CCP	[CCP, XCP]	string	Driver of access interface
Network name	Devices: ‘Ethernet’			string	Name of ethernet network (for network based access mode). Leave empty for channel based access mode.
Check access		☑		bool	Check device access after tool startup.
A2L file				uri	A2L file used by the port
Hex file				uri	Hex file used by the port
Mirror cache		Ignore	[Ignore, Disable, Enable]	uri	Enable or diable the mirror cache after initialisation of the device. Only has an effect on devices that are created by ecu.test.
Automatic recording		☐		bool	If this option is active, all signals used in the test case are automatically registered for recording.
Default acquisition rate		‘Tool-Default’		string	Declaration of measurement acquisition rate used as alternative in case no acquisition rate is set in the test step (’*’ and ‘?’ can be used as wildcard). “Tool-Default” activates the use of the standard acquisition rate of the tool
Procrastination for validation		-1		int	Defines the procrastination used for validating a written calibration value. If set to “-1” no validation will be performed.
Validation tolerance for calibration		3		float	Defines the tolerance used for validating a written calibration value. The value must be given in percent.
Force upload of calibration values		☐		bool	From CANape 12 SP8: Forces uploading calibration values. This is necessary when a calibration value is also written by the control unit software.
Do not transfer A2L and HEX file to CANape		☐		bool	This setting allows to skip the time for copying and reading the A2L and HEX files into CANape, if a CANape project which already includes the correct file is used.

Jobs 🛈¶

DownloadWorkbase¶

Download WP/RP from data set to control unit

Parameter

Name	Available if	Default value	Valid values	Type	Description
force		False	[False, True]	bool

GetAquisitionRates¶

Provides a list of all acquisition rates

IsDeviceRunning¶

Returns if the ECU is online.

Return value

Name	Available if	Default value	Valid values	Type	Description
result			[False, True]	bool

StartDevice¶

Establishes the connection from CANape to the ECU

Parameter

Name	Available if	Default value	Valid values	Type	Description
download		False	[False, True]	bool	Activates the automatic download during “GoOnline”.
timeout		2000		float	Timeout for the start in ms.

Return value

Name	Available if	Default value	Valid values	Type	Description
result			[False, True]	bool

StopDevice¶

Disconnects the ECU from CANape

Parameter

Name	Available if	Default value	Valid values	Type	Description
timeout		2000		float	Timeout for the stop in ms.

Return value

Name	Available if	Default value	Valid values	Type	Description
result			[False, True]	bool