Port DIAGNOSTICS_JOBS - OBD¶

ciType

‘VIN’

[‘VIN’, ‘CALID’, ‘CVN’, ‘ECUNAME’]

string

CiType

result

object

List of dictionaries. Each dictionary contains the address of the control unit under the ‘ECU’ key and the value of the infotype read out under the ‘CalibrationInfo’ key.

signalList

string

List of IDs to be requested, e.g. [‘01’, 02’]

result

object

List of dictionaries. Each dictionary contains the address of the control unit under the ‘ECU’ key and a list with the Current Powertrain Diagnostic data read out under the ‘CurData’ key. Elements of this list are dictionaries with the keys ‘PID’, ‘Value’, ‘Unit’ and ‘Description’.

Mode

‘confirmed’

[‘confirmed’, ‘pending’, ‘permanent’]

string

Mode for failure memory

result

object

List of dictionaries. Each dictionary contains the ECU Id under the ‘ECU’ key and a list of DTCs under the ‘DTCs’ key.

signal

string

PID to be requested, e.g. 0A

result

object

List of dictionaries. Each dictionary contains the ECU Id under the ‘ECU’ key, the DTC that caused required freeze frame data storage under the ‘SAE’ key and list of freeze frame data under the ‘FreezeFrame’ key. If there are is freeze frame data stored, this list contains for each freeze frame data a dictionary containing the keys ‘PID’, ‘Value’ and ‘Unit’ otherwise the list is empty.

result

object

List of dictionaries. Each dictionary contains the address of the ECU under the key ‘ECU’ and a list of all in-use performance tracking data read out under the key ‘UIMPR’. Elements of this list are in turn dictionaries with the keys ‘Name’, ‘Value’ and ‘Description’.

signals

object

Array with the values to be read (e.g. “DM05” for J1939) - list[str]. If this parameter is empty, the readiness currently selected in DiagRA is returned.

signal

string

PID to be requested, e.g. 0A

result

object

List of dictionaries. Each dictionary contains the address of the control unit under the ‘ECU’ key and a single-element list with the Current Powertrain Diagnostic data read out under the ‘CurData’ key. Element of this list is a dictionary with the keys ‘PID’, ‘Value’, ‘Unit’ and ‘Description’.

signal

string

MID to be requested, e.g. 01

result

object

List of dictionaries. Each dictionary contains the ECU Id under the ‘ECU’ key and the test results under the ‘TestResult’ key. The test result is a list of dictionaries where each dictionary represents a single test result containing the keys ‘MID’, ‘TestID’, ‘UnitID’, ‘Value’, ‘ValueMin’, ‘ValueMax’, ‘ValueUnit’ and ‘Description’.

signal

string

InfoType, which is read in service/mode 09. If the parameter is empty, currently selected values are returned. Support PID (00, 20, …) may also be used here.

result

object

List of dictionaries. Each dictionary contains the ECU Id under the ‘Ecu’ key, the requested vehicle info under the key ‘CurData’ and a textual representation of the vehicle info under the key ‘CurDataText’. The value of ‘CurData’ is a list containing dictionaries, where each dictionary represents a vehicle info with the keys ‘Name’, ‘Value’, ‘ValueUnit’ and ‘Description’.

modeNo

‘1’

[‘1’, ‘2’, ‘3’, ‘4’, ‘5’, ‘6’, ‘7’, ‘8’, ‘9’]

string

Service/mode for which the supported PIDs are to be determined

result

object

List of dictionaries. Each dictionary represents a supported PID. It contains the PID number under the ‘PID’ key and it`s description under the ‘Value’ key.

signalList

string

List of IDs to be requested, e.g. [‘01’, 02’]

result

object

List of dictionaries. Each dictionary contains the ECU Id under the ‘ECU’ key and the test results under the ‘TestResult’ key. The test result is a list of dictionaries where each dictionary represents a single test result containing the keys ‘MID’, ‘TestID’, ‘UnitID’, ‘Value’, ‘ValueMin’, ‘ValueMax’, ‘ValueUnit’ and ‘Description’.

signals

object

Array with the desired values - list[str]. If the parameter is empty, currently selected values are returned.

signals

object

Array with the identifiers to be read. - list[str].

signals

[]

object

Array with data to be read - list[str]

result

object

Liste von Fehlern aus den Steuergeräten.

sendData

object

SendData as ByteStream, hex string or byte list. Consists of service number (SID) and parameter(s).