Port SERVICEACCESS - SERVICE_MANAGER

Service access via model

Stimulation

The stimulation of ServiceEvent signals takes place via the model access and is only possible if this also supports the stimulation. The restrictions/comments of the model access also apply to the generic ServiceManager access.

Restrictions:

  • Stimulus input signals are not supported.

  • Trace files being referenced by a DataFileSegment in an STI file are not converted automatically by ecu.test.

  • It is up to the user to check whether the trace format being used is supported by the tool.

Name

Available if

Default value

Valid values

Type

Description

Path to the configuration file

string

This file on the tool host defines templates to find the matching model paths based on service data. Can be absolute or relative to the tool host base path.

Model port

string

Port ID (e.g. “MDL01”) of the model port via which the model access is to be performed. This property can remain empty if there is exactly one model port. If there is more than one model port, this property must be set.

Cycle time ❲ms❳

100

int

Simulation step size of the model. Will be used as waiting time between sequential model access steps if new values need to be calculated within the model. For example, when reading an array the corresponding index is first registered in the model. The correct matching value is only available when it has been calculated by the model after a specified time.