Port MODELACCESS - XIL¶

XIL MAPort

Stimulation¶

Restrictions:

Trace files being referenced by a DataFileSegment in an STI file are not converted automatically by ecu.test.
It is up to the user to check whether the trace format being used is supported by the tool.

Supported execution modes¶

Properties 🛈¶

Name	Available if	Default value	Valid values	Type	Description
Configuration file				string	Path to the configuration file of the MAPort. Path has to be either absolute, or relative to the model directory. If <auto>, the configuration file the TCF references to will be used.
Overwrite configuration parameters		‘<none>’		string	Allows the port configuration parameters in the specified configuration file to be overwritten. The parameter paths, including the new values, must be specified in a JSON format, e.g. ‘{“sample.path”: value}’. The parameter paths to be overwritten must already be defined in the port configuration file.
Replace current configuration		☑		bool	“True” replaces the current configuration with the selected one. Otherwise the running configuration will be used.
Stop simulation		‘stop’	[‘stop’, ‘test stop’, ‘no stop’] Display values: ‘stop’: ‘Stop’ ‘test stop’: ‘At test stop’ ‘no stop’: ‘Do not stop’	string	Specifies when the simulation is stopped. “Stop”: The simulation is stopped when the configuration stops. “At test stop”: The simulation is stopped when the execution of the test case stops. “Do not stop”: The simulation is not stopped implicitly.
Recording format		MF4	[CSV, MDF, MF4]	string	File format for recording
Delimiter	Recording format: ‘CSV’	‘;’	[‘;’, ‘,’]	string	Delimiter of CSV file
Recording down-sampling rate		<default>		int	This value can be specified to store only every N-th signal value. “<default>” means that the down-sampling rate is not specified and the vendor default is to be used.
Recording start timeout ❲s❳		30		int	Maximum allowed duration until the tool has actually started the capture after manually starting a capture.
Default recording acquisition rate		‘Tool-Default’		string	Recording acquisition rate to use as fallback, if no acquisition rate has been provided for the variable (”*” and “?” may be used as wildcards). “Tool-Default” uses the first available acquisition rate.
Enforce default recording acquisition rate		☐		bool	The default recording acquisition rate is enforced for all quantities when recording.
Model time refresh rate		0		float	Defines the interval (in seconds) at which the model time should be queried for synchronization with the test case. Value 0 causes a query after each simulation step.
Parameter files				string	A comma separated list of parameter files. The files will be transferred to the XIL server on start of configuration. Paths can be absolute or relative to the tool host base path.
Adapt matrix layout		☐		bool	Convert matrices from row layout (XIL) to column layout (ecu.test). In contrast to ASAM XIL, which implements the row layout for storing matrices, ecu.test uses the column layout. If this option is set, matrices are adapted to the internally implemented column layout when they are read in and before they are used in ecu.test. As a result, matrices are displayed correctly and indexing is done consistently according to the scheme [column][row]. If this option is not set, the missing adaptation of the layout causes that one works with the transposed matrix (see e.g. display in report). Thus, indexing the transposed matrix according to the above scheme in ecu.test is equivalent to indexing the (non-transposed) original matrix using the scheme [row][column] from the tool’s point of view. An unset option corresponds to the former behavior. It is recommended to set this for new test cases.

Jobs 🛈¶

DownloadParameterSets¶

Loads a single or multiple parameter files to the XIL server.

Parameter

Name	Available if	Default value	Valid values	Type	Description
parameterFilePaths				string	A comma separated list of parameter files.

ExecuteTargetScript¶

Loads a target script to the target system and executes it. The execution time is limited by the tool’s setting “Timeout for tool call”.

Parameter

Name	Default value	Type	Description
customProperties	{}	object	Custom properties for Target Script as dictionary, e.g. {“ApplicationProcessor”: “leaderAppl”}.
inputParameters	{}	object	Input parameters for Target Script as dictionary {“parameterName”: “parameterValue”}. Only primitive data types are supported.
outputParameterNames	[]	object	List of output parameters to be returned. These are read from the target script after execution. To be entered as a list of strings. Only primitive data types are supported.
targetScriptPath		uri	Absolute or relative path to target script on this machine. Relative paths are resolved relative to the workspace directory.

Return value

Name	Available if	Default value	Valid values	Type	Description
result				object	Values of output parameters as dictionary {“outputParameter”: “valueAfterExecution”}. The target script parameters to be returned need to be specified before execution with the respective job parameter.

GetAllStimulations¶

Get list of initialized stimuli files

Parameter

Name	Available if	Default value	Valid values	Type	Description
RunningOnly		False	[False, True]	bool	Return only active (running and paused) Stimuli.

Return value

Name	Available if	Default value	Valid values	Type	Description
return				object	List of active stimulation files

GetConfigState¶

Returns the current status of the specified configuration parameter. The parameter must be given as a complete path.

Parameter

Name	Available if	Default value	Valid values	Type	Description
configParam				string	Path of the configuration parameter within the configuration file of the port, e.g. “sample.path.value”.

Return value

Name	Available if	Default value	Valid values	Type	Description
return				string	Value of the configuration parameter

GetRecordingFilesStates¶

Get dictionary containing all recording files and their corresponding recording state

Return value

Name	Available if	Default value	Valid values	Type	Description
return				object	Dictionary containing file names and corresponding state (“activated”,”configured”, “running” or “finished”)

GetSimulationState¶

Get status of simulation

Return value

Name	Available if	Default value	Valid values	Type	Description
return				string	“disconnected”, “running”, “paused”, “stopped”, “not initialized” or “unknown: <MAPortState>”. The state “paused” is available since XiL-version 2.1.

GetSimulationTime¶

Request simulation time

GetStimulationState¶

GetStatus of stimulation

Parameter

Name	Available if	Default value	Valid values	Type	Description
InstanceIdentifier				string	Instance identifier of the stimulus of which to query the state.

Return value

Name	Available if	Default value	Valid values	Type	Description
return				string	“configuration”, “ready”, “running”, “paused”, “finished”, “stopped”, “not started” or “unknown: <SignalGeneratorState>”

PauseSimulation¶

Pauses the simulation and sets the state to “paused”.

PauseStimulation¶

Pause stimulation

Parameter

Name	Available if	Default value	Valid values	Type	Description
InstanceIdentifier				string	Instance identifier of the stimulus that is to be paused.

ResumeStimulation¶

Resume paused stimulation

Parameter

Name	Available if	Default value	Valid values	Type	Description
InstanceIdentifier				string	Instance identifier of the stimulus that is to be resumed.

TriggerClientEvent¶

Inserts an event into all running recordings of the port.

Parameter

Name	Available if	Default value	Valid values	Type	Description
description				string	Description of the event (freely selectable).
eventId		0		int	ID of the event (freely selectable). Range of valid values: 0-18446744073709551615.